|
 Specifications
See Architectural Specs
See Flame-Retardant Polyester Resins
See Flammability Test Data
Typical Liquid Properties ::
See Typical Mechanical Properties
FT 8815 Polyester resigns will burn if provided
with a sufficient amount of heat and oxygen. The degree of flame-retardancy of
laminates prepared using FT 8815 resins has been characterized using several
standard ASTM test methods. Testing has been performed under strictly
controlled conditions. The behavior of composites made using FT 8815
resigns may vary in an actual fire situation.
TYPICAL LIQUID PROPERTIES ¹ @ 25˚ C
|
Version
FT 8815
FT 8815
FT8815
FT8815
FT8815
FT8815
FT8815 |
Viscosity CPS
500
375
500
440
500
500
200 |
Thix
2.8
Non-Promoted
2.8
2.8
2.8
2.8
2.8 |
Gel Time Index*
20**
Non-Promoted
55**
23**
20**
20**
32** |
Gel to Peak minutes*
30
Non-Promoted
65
32
26
32 |
Peak Minutes
300
Non-Promoted
290
250
315
310
330 |
%N.V Exo,F
69.5
73
69.5
66
69.5
69.5
62 |
S.G
1.24
1.26
1.24
1.23
1.24
1.24
1.21 |
Shelf LifeMin
3 months
3 months
3 months
3 months
3 months
3 months
3 months |
|
Seta Closed Cup Flash Point of all FT 8815 resins is 31.6˚C (89˚F)
*
Brookfield LVF viscometer, # 3 spindle at 60 rpm
6:60 rpm ratio
** with
1.25% Superox 46709, 100 g mass
*** with
1.25% superox 46702, 100g mass
Minimum
shelf life performance refers to product in the original, unopened container.
Shelf stability is affected
by
storage conditions. See the "storage" section of this bulletin for further
details.
FT 8815
contains 4.5 parts MMA monomer per 45.5 parts FT 8815 and is designed to be
filled with 50 parts ATH
and used
as per Formula # 2 listed on page 3 of this bulletin.
NOTE:
some versions of FT 8815 may have minimum order quantity restrictions. For
more information,
contact
Fiberglass Technologies representative.
|
1610 Hanford Street * Levittown, PA 19057 * Phone: 215-943-4567 * Email: info@fiberglasstechnologies.com 
